My current idea for a travel case is to re-purpose the ABS Plastic Outernet Lantern enclosure
I have the Dreamcatcher board, the EasyAcc 20000 mAh charger, and a high wattage dual USB charging cube already enclosed. I have an on/off toggle switch on the back of the case to cut power to the Dreamcatcher when I want it fully off. The entire assembly will be powered by an ac cord plugged in where the old USB cord used to go on the back side. With the pegs on the back, I have a range of elevation angles I can easily achieve. It doesn’t have to be pointed quite as accurately as an off-set parabolic dish/LNB setup, so I have some elevation to play with.
With the 20000 mAh EasyAcc, at a current draw of 1.1 amps, I should be good for about 18 off charge, and continuous on charge.
The Maverick LNB will fit well after I drill a big hole on the left side of the front cover, and it will protrude out about 1 inch.
I’m planning to take the Maverick apart to get a smaller assembly to embed in the case. Has anybody opened up a Maverick yet to see what’s inside? Ken