My 32 GB Flash Drive files are visible in SKylark 4.4, but when I run the Rachel starthere.html file, and try to go to Rachel subdirectories, I can't.
When I try to drill down to Art, the CHIP directs me to 192.168.0.10/modules/wikipedia_for_schools/wp/index/subject.Art.htm which can't be found. The 192.168.0.10 is my CHIP's router address on my lan. Additionally, with Skylark 4.4, I don't popup the framed Rachel page as I do below with 4.2.
I re flashed a second CHIP to Skylark Version 4.2, and tried the same thing and was successful.
Drilling down in Art sends me to:
192.168.0.42/FS/get/downloads://RACHEL/bin/www/modules/wikipedia_for_schools/wp/index/subject.Art.htm which can be found. Again the 192.168.0.42 is the network address for my Skylark 4.2 system. (I have 2 CHIPs running simultaneously each flashed with a different version of Skylark)
Best I can figure is the HTML reader in both Skylark Version 4.2 and 4.4 are the same program, but because @Abhishek changed the CHIP's external storage file structure (and write protected the external drive), my Rachel program addresses get fowled up, and don't go to the correct file locations.
Another thing I found is in Skylark 4.4, the external drive (my Flash drive with Rachel on it) stands alone at an equal level with the CHIP's Download directory. In Skylark 4.2, the contents of the same external drive appear (or maybe are mirrored) within the CHIP's internal Download directory
Hopefully you or maybe @Abhishek or @zoltan can suggest a fix. I'd like to be able to see Rachel on Skylark 4.4. I full well understand why 4.4's external drive was changed, and don't think a back step would be good. Perhaps there is a simple patch we can SSH into our Skylark running Rachel, or maybe a quick and dirty new Rachel Start-Up file we can write. Ken