I am newbie and cannot get login page to show up. Using miniusb to computer, led lights seem to be working correctly.
I'll try to help you out. I'm another one of the Forum's do-it-yourselfers/techies.
First, please tell me what you got there in your lap, and how it is all tied together. Ken in Annapolis, MD
passive antenna outernet dreamcatcher v 2.03 using usb to pc windows 10 with new driver and have a working PI usb to serial com8
lights on board look good
type in myouternet.si and it times out
Let's address this one first. Correct url is my.outernet.is
Try that. I'm working up other comments as we speak. Ken
site cannot be reached
I'm brand new so don't assume I know anything and thanks for your help
First - the passive antenna has to be connected to the SMA connection marked LNA_IN. The other SMA connection marked LNA_BYPASS is for active antennas.
Second - I presume you don't have the Skylark screen showing?
Yes or no - - need to know for step 3. Ken
correct no skylark screen
Oh yes, which Dreamcatcher image file did you burn on the micro SD Chip? Ken
rebooted in correct sma connector no difference
all the led's are flashing just like the YouTube video
it's probably something stupid
Is the file this one dated 10-Oct-2017?
It's the latest which has a built-in selection to run a passive or active antenna. Ken
After you burned the image file and ran up the Dreamcatcher,(DC) did you access the DC thru the Outernet HotSpot? Ken
no its 170514189-passive-antenna
That's OK - - its an older version for passive antennas that does not have the new frequencies for Europe's 25E - - I presume you are not looking at that satellite, but are looking at Americas at 98W. Ken